Jabiru 3300 - Reassembly - Re-fitting The Oil Filler Tube

Introduction ...

This page contains photos of a Jabiru 3300A Solid Lifter engine under going a bulk strip and rebuild. This page documents the process of re-fitting the oil filler tube.



ALT text here

Image 1

Having replaced the dipstick housing assembly base o-ring it is now possible to push the housing assembly home so the the assembly locates correctly with the o-ring providing a seal. Once you are satisfied that the housing is in it's correct possition tighten the retaining grub screw (using some Loctite 243) but do not overtighten otherwise damage to the dipstick housing may result ...

View Larger Image ...