Jabiru 3300 - Reassembly - Alternator and Distributors

Introduction ...

This page contains photos of a Jabiru 3300A Solid Lifter engine under going a bulk strip and rebuild. This page documents the process of re-fitting the alternator and distributors.



ALT text here

Image 1

Here is the alternator on the bench (photographed during the teardown process) ...

View Larger Image ...


ALT text here

Image 3

And here it is after returning from parts cleaning and mounted back on the engine ...

View Larger Image ...


ALT text here

Image 5

Here is one of the four alternator mount bolts ...

View Larger Image ...

ALT text here

Image 6

Once the four alternator mount bolts have been torque'd as per the overhaul manual we need to set the gap between each magnet pole and each ignition coil using a feeler gauge ...

View Larger Image ...



ALT text here

Image 9

Next we can refit the distributor caps ...

View Larger Image ...

ALT text here

Image 10

And torque down their retaining posts ...

View Larger Image ...



ALT text here

Image 13

All four distributor cap retaining mounts in place ...

View Larger Image ...