Jabiru 3300 - Reassembly - Re-fitting The Mechanical Fuel Pump

Introduction ...

This page contains photos of a Jabiru 3300A Solid Lifter engine under going a bulk strip and rebuild. This page documents the process of re-fitting the mechanical fuel pump.



ALT text here

Image 1

Start by ensuring that the mating face of the fuel pump is clear of previous gasket remains and thoroughly degreased. Next apply a thin coat of Loctite 518 to either side of the two paper fuel pump gaskets ...

View Larger Image ...

ALT text here

Image 2

Next place one paper gasket over the fuel pump bolts onto the fuel pump flange, followed by the white plastic spacer, followed by the second paper gasket ...

View Larger Image ...

ALT text here

Image 3

Offer up the mechanical fuel pump to the crankcase mounting point ...

View Larger Image ...

ALT text here

Image 4

And torque up the two fuel pump bolts as per the overhaul manual ...

View Larger Image ...