Jabiru 3300 - Reassembly - Re-fitting The Starter Motor

Introduction ...

This page contains photos of a Jabiru 3300A Solid Lifter engine under going a bulk strip and rebuild. This page documents the process of re-fitting the starter motor.



ALT text here

Image 1

Here is the main body of the starter motor back from parts cleaning ...

View Larger Image ...





ALT text here

Image 6

Apply a generous amount of GP grease to the bush inner and bush outer of the starter motor clutch and also to the starter motor gear teeth ...

View Larger Image ...

ALT text here

Image 7

Ensure that the starter motor o-rings are seated properly and providing an adequate seal to the elements ...

View Larger Image ...


ALT text here

Image 9

Offer up the starter motor to the engine mounting plate ...

View Larger Image ...

ALT text here

Image 10

And torque up the mounting bolts ...

View Larger Image ...