Part 08 Removing the Rotax Flywheel Cover ...

Introduction ...

This page contains photos of the process of removing the flywheel cover from a ROTAX 912ULS engine (built August 2006).



ROTAX 912ULS flywheel cover

Image 1

Remove the remaining two M8 bolts that secure the flywheel cover to the magneto generator housing ...

View Larger Image ...

ROTAX 912ULS flywheel cover

Image 2

Here is the plastic flywheel cover on the bench ...

View Larger Image ...


ROTAX 912ULS flywheel cover

Image 4

This what the insider of the flywheel cover looks like ...

View Larger Image ...

ROTAX 912ULS flywheel cover

Image 5

And some photos of the now exposed flywheel ...

View Larger Image ...




ROTAX 912ULS flywheel cover

Image 9

And a photo of the mounting post for the ignition coil set ...

View Larger Image ...