Part 18 Removal of Oil Pump ...

Introduction ...

This page contains photos of the process of removing an oil pump from a ROTAX 912ULS engine (built August 2006.



ROTAX 912ULS Oil Pump Removal

Image 1

Here we can see the square shaped oil pump still in place. Note the four bolts used to secure it to the crankcase. Slacken these bolts and slide it off ...

View Larger Image ...

ROTAX 912ULS Oil Pump Removal

Image 2

Here we can see a view of the PTO end of the crankcase where the oil pump was mounted ...

View Larger Image ...