Part 42 Replacing the Crankshaft Locking Bolt Blanking Screw ...

Introduction ...

This page contains photos of the process of re-fitting the crankshaft locking blanking bolt to a ROTAX 912ULS engine (built August 2006).



ROTAX 912ULS crankshaft locking blanking bolt

Image 1

Here is the crank locking bolt blanking screw together with a new gasket "on the bench" ...

View Larger Image ...

ROTAX 912ULS crankshaft locking blanking bolt

Image 2

Screw in in the crank locking bolt hole ...

View Larger Image ...

ROTAX 912ULS crankshaft locking blanking bolt

Image 3

And torque to target torque as specified in the Rotax 912 IPC / Heavy Maintenance Manual ...

View Larger Image ...